ProHere® L 90103
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
Gives a matting effect to the surface of metal coatings.
Nonionic, polyethylene dispersion
This product is used in many applications including the following:
|Can & Coil||lubricity|
|General Metal||enhanced lubricity, matting|
See more products recommended for Can & Coil.
See more products recommended for General Metal.
These physical properties are typical but should not be considered specifications.
|pH||6.5 - 8.5|
|Percent Non-Volatile||49.5 - 50.5|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||500 - 1000|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Use personal protective equipment as required.