Release Coat® P1
Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
This product is one part of a two part silicone release coating. A catalyzed release coat system offers superior release and in most cases FDA compliance. This system is not gluable.
Uncatalyzed portion of a two-part silicone release coating
This product is used in many applications including the following:
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|Appearance||White, semi-viscous liquid|
|pH||3.0 - 6.0|
|Percent Non-Volatile||12.0 - 13.0|
|Brookfield Viscosity (cps, mPa·s)||300 - 800|
Site of Manufacture (and Product Code)
Release Coat® P1 must be combined with Catalyst P1 before applying to a substrate. This product may be applied by rod or blade coater.
Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.