Brand Family Overview
Large particle size Michem® Dispersion wax dispersions are available in water based and solventborne grades, and can enhance mobility, lubricity, buffability and toughness. They are used for mobility and lubricity during can & coil production, and buffability, toughness, gloss, and even flow in floor polishes.See more Michem Dispersion products.
An indicator designed to measure the uniformity of the coated substrate.
Indicator solution for Topaz primed sheet substrates
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||0.00 - 0.99|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
1. Soak a cotton pad with Topaz Indicator solution. 2. Wipe gently across the web on both the coated and non-coated areas of the sheet. The streak should be bluish and consistent in the applied area, showing a contrast with the non-coated area. 3. Color uniformity indicates the application uniformity level.
Ensure adequate ventilation. Keep away from open flames, hot surfaces and sources of ignition. Take precautionary measures against static discharges. To avoid ignition of vapors by static electricity discharge, all metal parts of the equipment must be grounded. Use only in an area containing flame proof equipment. Use personal protective equipment as required.