DigiPrime® 060
Brand Family Overview
Michem® Glide products are water-based high Slip additives for paints, coatings and graphic arts that when used at 1% - 5% solids on solids improve abrasion resistance and lubricity. They can also improve high temperature anti-blocking.
See more Michem Glide products.Usage
Imparts a print-receptive surface to paperboard and metalized paperboard substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo 30000 Digital Press.
Description
Primer for digital printing
Performance Attributes
This product is used in many applications including the following:
Application | Properties Imparted |
---|---|
HP Indigo Solutions | Applicator - Indigo ILP station, OEM - Indigo ws30000, Substrate - paper |
See more products recommended for HP Indigo Solutions.
Physical Properties
These physical properties are typical but should not be considered specifications.
Appearance | Clear liquid |
---|---|
pH | 9.5 - 11.5 |
Percent Non-Volatile | 4.0 - 5.0 |
Brookfield Viscosity (cps, mPa·s) | 3 - 30 |
Spindle Number | 1 |
RPM | 60 |
Site of Manufacture (and Product Code)
CIN (DP060)
AUB (DP060.E)
SNG (DP060.S)
Application Data
Indigo 30000 Digital Press Defoaming : In the event of foam development, small amounts of suitable antifoam are recommended. Please refer to Michelman for suitable antifoam grade and usage. Clean up: Clean up must be accomplished with soft water while the applicator roll is still damp. In case the primer dries, residue may be cleaned by scrubbing with soap and water. For hard residues, a mix of caustic solution might be used. Do not dilute.