Ecrovin® LV 470
Brand Family Overview
Michem® Glide products are water-based high Slip additives for paints, coatings and graphic arts that when used at 1% - 5% solids on solids improve abrasion resistance and lubricity. They can also improve high temperature anti-blocking.See more Michem Glide products.
Provides good blocking resistance and high gloss in latex paints. This product is APE free.
Terpolymer emulsion based on vinyl acetate/vinyl versatate/maleic acid ester
This product is used in many applications including the following:
|Building Paints||block resistance, gloss enhancement|
See more products recommended for Building Paints.
These physical properties are typical but should not be considered specifications.
|pH||3.0 - 6.0|
|Percent Non-Volatile||50.0 - 52.0|
|Brookfield Viscosity (cps, mPa·s)||3000 - 9000|
Site of Manufacture (and Product Code)
This emulsion is compatible with most additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of product in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycol ether. For Storage and Safety information see Material Safety Data Sheet.