Michem® Coat 82
Brand Family Overview
Michem® Glide products are water-based high Slip additives for paints, coatings and graphic arts that when used at 1% - 5% solids on solids improve abrasion resistance and lubricity. They can also improve high temperature anti-blocking.See more Michem Glide products.
A repulpable, printable, and cold set gluable coating optimized for water resistance and higher COF. It also offers intermediate MVTR protection. Common uses include packaging for produce and meats, or anywhere packaged goods require protection from water or moisture vapor. It can be used alone as a single bump, or can be an ideal basecoat for other barrier-enhancing Michelman coatings.
Water resistance coating with intermediate moisture barrier and higher COF.
This product is used in many applications including the following:
|Perishables||MVTR, water resistance|
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 9.5|
|Percent Non-Volatile||50.0 - 52.0|
|Brookfield Viscosity (cps, mPa·s)||400 - 700|
Site of Manufacture (and Product Code)
Michem® Coat 82 is best applied via off-line rod coater or in-line at the wet end of the corrugator. Dry end application is not recommended. Dilution is not recommended.