Michem® Emulsion 93235
Brand Family Overview
Michem® Glide products are water-based high Slip additives for paints, coatings and graphic arts that when used at 1% - 5% solids on solids improve abrasion resistance and lubricity. They can also improve high temperature anti-blocking.See more Michem Glide products.
This phenol free additive is best used in water based coatings where improved slip, rub resistance, hardness and/or block resistance is needed. It has proven very effective for mar resistance in floor polish formulations as well as mar resistance and shine in car polish formulations.
Nonionic polyethylene emulsion
This product is used in many applications including the following:
|Textiles & Leather||lubricity for needle and thread, scuff resistance and feel|
|Automotive Care||mar resistance|
|Building Paints||block resistance, lubricity, mar resistance|
|Industrial & Institutional||abrasion resistance, buffability, slip resistance|
|Inks||block resistance, rub resistance, scratch resistance|
|Overprint Varnishes||block resistance, rub resistance, scratch resistance|
|Gloves||block resistance, release|
|Industrial Wood & Plastic||abrasion resistance, block resistance, lubricity, scratch resistance|
|Exterior Wood Protection||block resistance, durability, scratch resistance|
|Thermal Transfer||mar resistance, release|
See more products recommended for Textiles & Leather.
See more products recommended for Automotive Care.
See more products recommended for Building Paints.
See more products recommended for Industrial & Institutional.
See more products recommended for Inks.
See more products recommended for Overprint Varnishes.
See more products recommended for Gloves.
See more products recommended for Industrial Wood & Plastic.
See more products recommended for Exterior Wood Protection.
See more products recommended for Thermal Transfer.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 10.5|
|Percent Non-Volatile||34.5 - 35.5|
|Recommended pH Range||>7|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)