Michem® Coat 40 Plus N
A water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.
Water resistant, gluable coating
This product is used in many applications including the following:
|Food Service||water resistance|
See more products recommended for Food Service.
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|Appearance||White, semi-viscous liquid|
|pH||5.0 - 10.0|
|Percent Non-Volatile||29.0 - 31.0|
|Brookfield Viscosity (cps, mPa·s)||200 - 800|
Site of Manufacture (and Product Code)
Michem® Coat 40 Plus N can be applied either in-line or off-line on the corrugator at the wet or dry end, via rod or blade.