Michem® Emulsion 42035A
Brand Family Overview
Michem® Guard waterborne dispersions add optimum abrasion/mar resistance, and slip and block resistance without the use of solvents. Some also provide a matting effect for a more natural appearance.See more Michem Guard products.
This film former for fiberglass sizing formulations is used to reinforce polypropylene. It provides an excellent balance between mechanical properties and color and is suitable for sizings for chopped strands as well as for continuous fiber.
Cationic water based emulsion of polyolefin waxes.
This product is used in many applications including the following:
|Fiber Sizing||chopped strands|
See more products recommended for Fiber Sizing.
These physical properties are typical but should not be considered specifications.
|Appearance||Off-white to yellow liquid|
|pH||3.5 - 6.5|
|Emulsifier Charge||Cationic/ Nonionic|
|Percent Non-Volatile||34.5 - 35.5|
|Recommended pH Range||<7|
|Brookfield Viscosity (cps, mPa·s)||<30|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.