Brand Family Overview
Michem® Guard waterborne dispersions add optimum abrasion/mar resistance, and slip and block resistance without the use of solvents. Some also provide a matting effect for a more natural appearance.See more Michem Guard products.
A coating which provides water and grease resistance and excellent MVTR properties on kraft liner and other substrates. When properly applied over a base coat, this repulpable coating is recommended as a replacement for some curtain coating applications, poly-laminated board and plastic bags.
MVTR, water and grease resistance coating
This product is used in many applications including the following:
|Perishables||MVTR, release with barrier|
|Industrial||grease & oil resistance, MVTR|
See more products recommended for Perishables.
See more products recommended for Food Service.
See more products recommended for Industrial.
These physical properties are typical but should not be considered specifications.
|pH||8.2 - 9.2|
|Percent Non-Volatile||38.5 - 39.5|
|Brookfield Viscosity (cps, mPa·s)||100 - 600|
Site of Manufacture (and Product Code)
VaporCoat® 2200R is best applied by rod coater at a rate of 4-7 wet pounds per MSF and as a pre-applied coating or in-line at the wet end of the corrugator or by blade, flexo or gravure at the dry end of the corrugator. EZ Cup Viscosity = 9 - 20seconds, #3 Cup.