Brand Family Overview
Michem® Lube is a versatile family of nanoscale wax emulsions, mostly carnauba and paraffin-based, used to improve processing and performance in many industries, as well as provide a wide array of surface properties.See more Michem Lube products.
When used for off-line optimizing of paper and synthetic or film, offers improved adhesion properties on certain synthetics, with less need for corona compared to the offline primer DigiPrime® 4431. DigiPrime® 6611 primed surfaces may have a limited shelf life. Typical shelf life is up to 8 weeks but shelf life should be established for each substrate surface and application.
Near line primer for HP Indigo Electroinks.
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - flexo / gravure/ roll, Substrate - film, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||18 - 20|
|pH||9.5 - 11.5|
|Shelf Life (mo)||24|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||9.0 - 10.0|
|Specific Gravity||0.95 - 1.00|
|Brookfield Viscosity (cps, mPa·s)||10 - 30|
Site of Manufacture (and Product Code)
Since DigiPrime® 6611 is an offline primer, we recommend Flexo or Reverse gravure when applying the primer on the substrate. Wet coat weight to apply may vary, but is typically between 0.8 to 1.2 GSM wet. Refresh with corona discharge may be beneficial for synthetic films. Though coat weight is low, special care should be taken when drying the wet primer film (drying conditions) as well as rewinding an storing the primed reels prior to printing.