DigiGuard® Toner Imprintable 6000
Brand Family Overview
Michem® Prime functionalized copolymer dispersions deliver the flexibility, water/chemical resistance and barrier properties of polyethylene in a water-based form. Property enhancements include; excellent clarity, adhesion, lower heat seal temperature, toughness, and crosslinkability.See more Michem Prime products.
An acrylic-based aqueous coating for application over HP Indigo digital ink (sizing dependent) printed on paper and paperboard substrates. This product can be evaluated over waterbased ink jet inks.
UV overprint varnish
This product is used in many applications including the following:
|Overprint Varnish||UV coating|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|pH||8.5 - 9.0|
|Percent Non-Volatile||39.0 - 43.0|
Site of Manufacture (and Product Code)
DigiGuard® Toner Imprintable 6000 should be evaluated in the laboratory using the actual ink system and substrate to ensure that leveling, intercoat adhesion gloss and other performance characteristics are acceptable. In general, UV coatings may not exhibit complete intercoat adhesion over some ink systems. A primer may be considered for use if this property needs to be improved.
Avoid contact with eyes, skin and clothing. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.