DigiGuard® UV 2250
Brand Family Overview
Michem® Prime functionalized copolymer dispersions deliver the flexibility, water/chemical resistance and barrier properties of polyethylene in a water-based form. Property enhancements include; excellent clarity, adhesion, lower heat seal temperature, toughness, and crosslinkability.See more Michem Prime products.
A general purpose matte UV coating that provides excellent rub resistance. It is specifically formulated for use over HP Indigo or select toner based inks and energy cure inks to be applied in-line or off-line via anilox coaters.
UV overprint varnish
This product is used in many applications including the following:
|Overprint Varnish||matte, UV coating|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||14 - 16|
|Shelf Life (mo)||6|
|Freeze/Thaw Stability||None: protect from freezing|
|Percent Non-Volatile||99.0 - 100.0|
|Specific Gravity||1.05 - 1.07|
Site of Manufacture (and Product Code)
Typical applications include sheetfed printing on paper or paperboard substrates where matte gloss is desired. Typical gloss reading is 5-15 points with a 60° gloss meter. This is dependent on the substrate and application method. DigiGuard® UV 2250 should be evaluated in the laboratory using the actual ink system and substrate to ensure that leveling, intercoat adhesion gloss and other performance characteristics are acceptable. In general, UV coatings may not exhibit complete intercoat adhesion over some ink systems. A primer may be considered for use if this property needs to be improved.