DigiGuard® Gloss 310

Brand Family Overview

Michem® Release Agents are environmentally friendly water-based mold release formulations used to prevent processed material from adhering to the substrate surface during molding operations. The products are applied directly to the mold or forming surface, providing easy release of the part with defect-free performance. Various grades of Michem Release Agent are designed for rubber, plastic, friction products, and other molding jobs.

See more Michem Release products.


Used over HP Indigo Electroinks® it gives protection to the ink when used in form, fill and seal packaging applications. It offers good slip allowing easy feed of the coated web and is resistant to heat from the heat sealing operation. It can be used in food packaging as a protective overprint varnish.


Overprint varnish for flexible packaging

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Overprint VarnishApplicator - flexo / gravure/ roll, controlled slip, food packaging, heat resistance, high gloss

See more products recommended for Overprint Varnish.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceLight yellow
pH8.0 - 10.0

Site of Manufacture (and Product Code)

AUB (DGG310.E)

Application Data

DigiGuard® Gloss 310 can be applied via flexo, gravure, or roll coater. A drying temperature of 60°C or above will ensure that optimum heat resistance of the coating is achieved.