Michem® Emulsion 1270
Brand Family Overview
Michem® Release Agents are environmentally friendly water-based mold release formulations used to prevent processed material from adhering to the substrate surface during molding operations. The products are applied directly to the mold or forming surface, providing easy release of the part with defect-free performance. Various grades of Michem Release Agent are designed for rubber, plastic, friction products, and other molding jobs.See more Michem Release products.
Provides slip and block resistance in a wide variety of coatings and formulas. It has very broad global food contact compliance, combined with a wide pH compatibility. It is a more cost effective solution than Michem® Emulsion 13025P.
Nonionic carnauba emulsion
This product is used in many applications including the following:
|Functional Coatings||block resistance, slip and lubricity|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Tan, low viscosity liquid|
|pH||8.0 - 11.0|
|Recommended pH Range||2.0 - 12.0|
Site of Manufacture (and Product Code)
Michem® Emulsion 1270 should be added at a few percent solids (typically 2 to 4%) in your coating, with adequate mixing.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.