Michem® Flex P1852
Brand Family Overview
Michem® Release Agents are environmentally friendly water-based mold release formulations used to prevent processed material from adhering to the substrate surface during molding operations. The products are applied directly to the mold or forming surface, providing easy release of the part with defect-free performance. Various grades of Michem Release Agent are designed for rubber, plastic, friction products, and other molding jobs.See more Michem Release products.
Promotes superior adhesion to extrusion coated resins for film, metal and paper substrates. This product exhibits weatherability, water and chemical resistance to many aggressive package contents such as water, oils, flavors and fragrances. This product is also suitable for resins extruded at low temperatures.
Water based primer for liquids and extrusion coated resins.
These physical properties are typical but should not be considered specifications.
|pH||7.7 - 8.7|
Site of Manufacture (and Product Code)
Michem®Flex P1852 may be applied via flexo, gravure or smooth roll coater. Corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is best for in-line processes, as it may block in rewound rolls. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #2 Cup, 23 - 25 sec.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.