Brand Family Overview
Michem® Shield waterbased polyethylene emulsions are an effective and inexpensive way to improve the performance of OPVs, and is FDA approved. Enhanced properties include excellent rub resistance, good gloss, re-coatability, and water resistance.See more Michem Shield products.
Imparts a print-receptive surface to paperboard and metalized paperboard substrates to improve the transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available on the Indigo 30000 Digital Press.
Primer for Digital Printing
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - Indigo ILP station, OEM - Indigo ws30000, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|pH||9.5 - 11.5|
|Percent Non-Volatile||4.0 - 5.0|
|Brookfield Viscosity (cps, mPa·s)||3 - 30|
Site of Manufacture (and Product Code)
Indigo 30000 Digital Press Defoaming : In the event of foam development, small amounts of suitable antifoam are recommended. Please refer to Michelman for suitable antifoam grade and usage. Clean up: Clean up must be accomplished with soft water while the applicator roll is still damp. In case the primer dries, residue may be cleaned by scrubbing with soap and water. For hard residues, a mix of caustic solution might be used. Do not dilute.