Michem® Flex P1852
Brand Family Overview
Michem® Shield waterbased polyethylene emulsions are an effective and inexpensive way to improve the performance of OPVs, and is FDA approved. Enhanced properties include excellent rub resistance, good gloss, re-coatability, and water resistance.See more Michem Shield products.
Promotes superior adhesion to extrusion coated resins for film, metal and paper substrates. This product exhibits weatherability, water and chemical resistance to many aggressive package contents such as water, oils, flavors and fragrances. This product is also suitable for resins extruded at low temperatures.
Water based primer for liquids and extrusion coated resins.
This product is used in many applications including the following:
|Extrusion Coating Primers||adhesion for film|
See more products recommended for Extrusion Coating Primers.
These physical properties are typical but should not be considered specifications.
|pH||7.7 - 8.7|
|Percent Non-Volatile||32.0 - 34.0|
|Brookfield Viscosity (cps, mPa·s)||0 - 200|
Site of Manufacture (and Product Code)
Michem®Flex P1852 may be applied via flexo, gravure or smooth roll coater. Corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is best for in-line processes, as it may block in rewound rolls. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #2 Cup, 23 - 25 sec.