Michem® Tite 335AF
Brand Family Overview
Michem® Shield waterbased polyethylene emulsions are an effective and inexpensive way to improve the performance of OPVs, and is FDA approved. Enhanced properties include excellent rub resistance, good gloss, re-coatability, and water resistance.See more Michem Shield products.
A coating which bonds corrugated to Surlyn or polyethylene skin pack films, firmly trapping the product in between. Provides excellent adhesion to most wax free, water based or litho inks. This product is hot melt gluable.
Skin packing / heat seal coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|pH||7.8 - 8.8|
|Percent Non-Volatile||32.3 - 35.3|
|Brookfield Viscosity (cps, mPa·s)||150 - 850|
Site of Manufacture (and Product Code)
Michem® Tite 335AF can be applied to sheeted corrugated using a roll coater. EZ Cup Viscosity = 15 - 35 seconds, #3 Cup. It can also be applied at the dry end of the corrugator.
Handle in accordance with good industrial hygiene and safety practice.