DigiGuard® Gloss 110

Brand Family Overview

Michem® Tite waterbased primers reduce many of the adhesion challenges of skin packaging by providing a tenacious bond between corrugated and Surlyn®/poly film.

See more Michem Tite products.


A high gloss, temperature resistant, water based overprint varnish which meets FDA food contact requirements.


Overprint varnish for flexible packaging

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Overprint VarnishApplicator - flexo / gravure/ roll, food packaging, heat resistance, high gloss

See more products recommended for Overprint Varnish.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, translucent liquid
pH8.0 - 10
Brookfield Viscosity (cps, mPa·s) <200
Spindle Number2

Site of Manufacture (and Product Code)

CIN (DGG110)

Application Data

DigiGuard® Gloss 110 can be applied by flexo, gravure or roll coater. A drying temperature of 60C or above will ensuer optimum heat resistance of the coating is achieved.


Ensure adequate ventilation. Wear personal protective equipment.