Michem® In-Line Primer 030
Brand Family Overview
Michem® Tite waterbased primers reduce many of the adhesion challenges of skin packaging by providing a tenacious bond between corrugated and Surlyn®/poly film.See more Michem Tite products.
Imparts a print-receptive surface to most substrates to improve the ink transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available as options on both the WS6000 and WS6600 presses. The primer improves the surface of a wide range of paper substrates, both uncoated and clay-coated of various basis weights, as well as PSA label stocks with paper or polyolefin face-stocks, including textured papers and transparent labelstock. This product possesses good stability to light and is resistant to yellowing.
Primer for Digital Printing
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - Indigo ILP station, OEM - Indigo 8000, OEM - Indigo ws6000, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|Appearance||White, translucent liquid|
|pH||8.0 - 10.0|
|Brookfield Viscosity (cps, mPa·s)||<100|
Site of Manufacture (and Product Code)
Michem® In-Line Primer 030 is designed specifically for use in the in-line priming unit of an HP Indigo WS6600 printing press. As such, when run as instructed by HP Indigo on paper substrates, the ILP unit will apply the correct amount of primer to achieve optimal ink adhesion and press performance. EZ Cup Viscosity - #3 Cup, 8 - 13 seconds. 09.09.16CAR: added information to the Application Data per JB. Do not dilute.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.