Michem® Flex P2300
Brand Family Overview
Michem® Wax micronized waxes enhance the performance of water-based, solventborne and powder coating formulations. Highly efficient, these waxes are used as process aids and improve many coating and ink properties, including: scratch and mar resistance, lubricity, block resistance, release, and matting.
See more Michem Wax products.Usage
Primer for film, metalized film, printed film, and paper substrates promoting excellent adhesion to extrusion coated resins resulting in high bond strength for dry and low moisture contents. It creates very strong adhesion between treated film and PE extrudate. It may also be used on film substrates to promote adhesion to liquid top coats such as Michelman heat seal coatings and acrylic coatings.
Description
Water based primer for extrusion coating.
Performance Attributes
This product is used in many applications including the following:
| Application | Properties Imparted |
|---|---|
| Extrusion Coating Primers | adhesion for film |
See more products recommended for Extrusion Coating Primers.
Physical Properties
These physical properties are typical but should not be considered specifications.
| Appearance | Clear liquid |
|---|---|
| Percent Non-Volatile | 4.5 - 5.5 |
Site of Manufacture (and Product Code)
CIN (MFP2300)
AUB (MFP2300.E)
SNG (MFP2300.S)
Application Data
Michem® Flex P2300 may be applied via flexo, gravure or smooth roll coater. Dilute 1:1 with water prior to use. Corona or flame treat substrates prior to priming and dry thoroughly with hot, circulating air. This product is best for in-line processes. Recommended application weight for film substrates is 0.025 - 0.075 dry g/m2 (0.5-1.5 wet g/m2). EZ Cup Viscosity - #2 Cup, 16-18 sec.
Storage
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.