DigiGuard® Gloss 310
Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
Used over HP Indigo Electroinks® it gives protection to the ink when used in form, fill and seal packaging applications. It offers good slip allowing easy feed of the coated web and is resistant to heat from the heat sealing operation. It can be used in food packaging as a protective overprint varnish.
Overprint varnish for flexible packaging
This product is used in many applications including the following:
|Overprint Varnish||Applicator - flexo / gravure/ roll, controlled slip, food packaging, heat resistance, high gloss|
See more products recommended for Overprint Varnish.
These physical properties are typical but should not be considered specifications.
|pH||8.0 - 10.0|
|Brookfield Viscosity (cps, mPa·s)||<200|
Site of Manufacture (and Product Code)
DigiGuard® Gloss 310 can be applied via flexo, gravure, or roll coater. A drying temperature of 60°C or above will ensure that optimum heat resistance of the coating is achieved.