Ecrovin® LV 382
Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
Optimized for low VOC interior wall paints, this emulsion provides excellent wet scrub resistance due to outstanding pigment binding power of the binder in heavily-filled systems. It also offers very good abrasion resistance and hiding power and is APE free.
Water-based vinyl acetate copolymer emulsion
This product is used in many applications including the following:
|Building Paints||abrasion resistance, hiding power, wet scrub resistance|
See more products recommended for Building Paints.
These physical properties are typical but should not be considered specifications.
|pH||3.0 - 5.0|
|Brookfield Viscosity (cps, mPa·s)||100 - 800|
Site of Manufacture (and Product Code)
This emulsion is compatible with most common additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of products in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycolether. For Storage and Safety information see Material Safety Data Sheet.