Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
Water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.
Water resistant, gluable coating
This product is used in many applications including the following:
See more products recommended for Perishables.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||30 - 45|
|pH||5.0 - 9.0|
|Brookfield Viscosity (cps, mPa·s)||200 - 800|
Site of Manufacture (and Product Code)
HydraBan® 410 can be applied either in-line or off-line at the corrugator, wet or dry end, via rod or blade. EZ Cup Viscosity = 30 - 45seconds, #3 cup.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.