Michem® Coat 40 Plus N
Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
A water based coating designed to provide good water resistance to corrugated board. It is cold set gluable with most adhesives.
Water resistant, gluable coating
This product is used in many applications including the following:
|Food Service||water resistance|
See more products recommended for Perishables.
See more products recommended for Food Service.
These physical properties are typical but should not be considered specifications.
|Appearance||White, semi-viscous liquid|
|EZ Cup Viscosity (s)||25 - 35|
|pH||5.0 - 10.0|
|Brookfield Viscosity (cps, mPa·s)||200 - 800|
Site of Manufacture (and Product Code)
Michem® Coat 40 Plus N can be applied either in-line or off-line on the corrugator at the wet or dry end, via rod or blade.