Michem® Coat 55
Brand Family Overview
Micryl™ waterbased coatings offer water and grease resistance with exceptional flexo runnability. They are applied over ink as protective, rub-resistant finishes, and also used as low-cost, heat-resistant overprints for porous substrates.See more Micryl products.
An oil and grease resistant coating which also imparts good water resistance. It is printable and gluable with water based and hot melt adhesives.
Fluorocarbon free, water and grease resistant coating
This product is used in many applications including the following:
|Food Service||grease & oil resistance|
See more products recommended for Food Service.
These physical properties are typical but should not be considered specifications.
|EZ Cup Viscosity (s)||12 - 18|
|pH||8.5 - 9.5|
|Brookfield Viscosity (cps, mPa·s)||200 - 650|
Site of Manufacture (and Product Code)
Michem® Coat 55 is an excellent choice for application at the wet end of the corrugator or offline using a rod coater with minimum #2 rod. Do not dilute.