Coating X300™ AF

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

Provides high levels of water resistance and good moisture resistance for kraft paper. It protects food products from excessive moisture, freezer burn, and sticking. When diluted for mill application, it is an economical sizing agent. Gluability with hot melt adhesives is excellent, but cold set gluing is not recommended.

Description

Waterborne coating demonstrating excellent water hold out

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food Servicewater resistance
Industrialwater resistance
Perishablesrelease with barrier, water resistance

See more products recommended for Food Service.
See more products recommended for Industrial.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite liquid
Percent Non-Volatile39.5 - 40.5
Brookfield Viscosity (cps, mPa·s) 100 - 600
Spindle Number3
RPM60

Site of Manufacture (and Product Code)

CIN (X300AF)
SNG (X300AF.S)

Application Data

Coating X300™ AF can be applied at the corrugator using a blade or rod coater.

Storage

Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.