DigiGuard® Gloss 100

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

A water based, heat resistant, glossy overprint varnish.

Description

Water based overprint varnish

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Overprint VarnishApplicator - flexo / gravure/ roll, heat resistance, high gloss

See more products recommended for Overprint Varnish.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceLight tan liquid
Percent Non-Volatile28.0 - 29.5
Brookfield Viscosity (cps, mPa·s) 0 - 200
Spindle Number3
RPM60

Site of Manufacture (and Product Code)

CIN (DGG100)
AUB (DGG100.E)

Application Data

EZ Cup Viscosity = 30 - 40seconds, #2 Cup.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.