Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
This patented flexo and gravure ready coating provides excellent adhesion of HP Indigo ElectroInks® to most films and papers. This product is suitable for food contact and is especially useful for flexible packaging applications as well as label production. When applied at the recommended coating weight, the optical properties of the substrate are minimally affected, so maintaining the original aspect of the substrate. This product possesses good stability to light and is resistant to yellowing.
Off-line primer for HP Indigo printability
This product is used in many applications including the following:
|HP Indigo Solutions||Applicator - flexo / gravure/ roll, OEM - Indigo ws10000, OEM - Indigo ws5000, OEM - Indigo ws7000, Substrate - film, Substrate - paper|
See more products recommended for HP Indigo Solutions.
These physical properties are typical but should not be considered specifications.
|Appearance||White, translucent liquid|
|Percent Non-Volatile||27.5 - 29.0|
|Brookfield Viscosity (cps, mPa·s)||<100|
Site of Manufacture (and Product Code)
DigiPrime® 4431 may be applied by flexo or gravure coating systems. EZ Cup Viscosity - #3 Cup, 8-13 sec. Recommended coat weight: 0.2 to 0.3 gsm dry.