DigiPrime® 5000

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

A print primer that provides excellent adhesion of HP Indigo ElectroInks® to treated films and paper. It adheres well to many synthetics including soft vinyl. This product is designed for automatic rotary screen printing and may also be applied via flexo and other methods.

Description

Primer for digital printing

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
HP Indigo SolutionsApplicator - flexo / gravure/ roll, Applicator - screen, OEM - Indigo various presses, Substrate - vinyl

See more products recommended for HP Indigo Solutions.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite to light yellow. opaque liquid
Percent Non-Volatile23.6 - 25.5
Brookfield Viscosity (cps, mPa·s) 150 - 300
Spindle Number2
RPM60

Site of Manufacture (and Product Code)

CIN (DP5000)
AUB (DP5000.E)
SNG (DP5000.S)

Application Data

DigiPrime® 5000 may be applied by flexo or gravure coating systems. EZ Cup Viscosity - #3 Cup 16 - 18 sec.

Storage

Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.