Ecrovin® LV 485
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Ideal in low VOC glossy or satin latex paint applications, this product offers excellent blocking resistance at a low minimum film forming temperature with outstanding abrasion resistance.
Water-based vinyl acetate copolymer emulsion
This product is used in many applications including the following:
|Building Paints||abrasion resistance, block resistance|
See more products recommended for Building Paints.
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||50.0 - 52.0|
|Brookfield Viscosity (cps, mPa·s)||4000 - 10000|
Site of Manufacture (and Product Code)
This emulsion is compatible with most additives, pigments and pigment preparations and can be combined with other emulsions. Due to the variety of product in the market, compatibility and storage stability have to be tested from case to case. Polyurethane thickeners are highly recommended but most commercial thickeners can be used. Due to the low minimum film forming temperature of this emulsion it is not mandatory to add coalescing agents. For application properties of the final product it might be helpful to add co-solvents like butyl glycol, butyl diglycol, Texanol or glycol ether. For Storage and Safety information see Material Safety Data Sheet.