HydraBan® 420

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


A water based coating designed to provide good water beading and resistance to corrugated board while being cold set gluable with most adhesives.


Water beading, water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableswater resistance

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite liquid
Percent Non-Volatile29.0 - 31.0
Brookfield Viscosity (cps, mPa·s) 100 - 600
Spindle Number3

Site of Manufacture (and Product Code)

CIN (HY420)
SNG (HY420.S)

Application Data

HydraBan® 420 can be applied in-line on the corrugator from the wet or dry end, with a rod or blade coater, or offline. It can also be applied by flexo.


Handle in accordance with good industrial hygiene and safety practice.