Licomer® IN 41
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
This high anti-slip additive for floor polish formulations improves scratch resistance.
Anionic / Nonionic polyethylene emulsion
These physical properties are typical but should not be considered specifications.
|Appearance||slight yellow liquid|
|Percent Non-Volatile||34.0 - 36.0|
|Brookfield Viscosity (cps, mPa·s)||0 - 140|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Use personal protective equipment as required.