MaxWhite® 17

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

A white coating designed to offer excellent brightness before and after wax. This product is both hot melt and cold set gluable.

Description

Waxable white coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableswhites and colors

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite liquid
Percent Non-Volatile67.8 - 69.3
Brookfield Viscosity (cps, mPa·s) 100 - 1000
Spindle Number3
RPM60

Site of Manufacture (and Product Code)

CIN (MW17)

Application Data

MaxWhite® 17 when applied with a #8 rod on kraft liner should provide brightness in the low to mid 80's. Shelf life is 6 months maximum, assuming moderate temperatures (40-80F). If the coating is stored at temps in excess of 90-95 F, the shelf life is less than one month. Please manage inventory accordingly.

Storage

Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.