Michem® Clean 1188
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
The recommended cleaning solution for Michem® In-Line Primer 030 and 040 priming solutions, this product should be added to the cleaning tank of the in-line priming unit.
Cleaning solution for Indigo WS6600
These physical properties are typical but should not be considered specifications.
|Appearance||Clear, colorless solution|
|Percent Non-Volatile||0.90 - 1.10|
|Brookfield Viscosity (cps, mPa·s)||1 - 5|
Site of Manufacture (and Product Code)
Michem® Clean 1188 is to be used with the Indigo in-line priming unit.
Avoid contact with skin and eyes. Handle in accordance with good industrial hygiene and safety practice. Wear personal protective equipment.