Michem® Coat 40 Plus

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


Designed to provide good water resistance to corrugated board while being cold set gluable with most adhesives.


Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food Servicewater resistance
Perishableswater resistance

See more products recommended for Food Service.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, semi-viscous liquid
Percent Non-Volatile29.5 - 30.5
Brookfield Viscosity (cps, mPa·s) 250 - 450
Spindle Number3

Application Data

Michem ® Coat 40 Plus can be applied either in-line or off-line on the corrugator, wet or dry end, rod or blade.