Michem® Coat 40W AFP

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


Water resistant coating with excellent cold set gluability.


Water resistant, gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishableswater resistance

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

Appearanceoff-white liquid
Percent Non-Volatile29.0 - 31.0
Brookfield Viscosity (cps, mPa·s) 450 - 950
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

Michem® Coat 40W AFP can be applied at the wet or dry end of the corrugator using either a blade or rod coater. It can also be applied offline.


Handle in accordance with good industrial hygiene and safety practice.