Michem® Coat 40Y

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


A versatile water resistant coating which is gluable with a wide range of water based and hot melt adhesives.


Water resistant, cold set and hot melt gluable coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Food Servicewater resistance
Industrialwater resistance
Perishableswater resistance

See more products recommended for Food Service.
See more products recommended for Industrial.
See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceMilky white, semi-viscous liquid
Percent Non-Volatile34.0 - 36.0
Brookfield Viscosity (cps, mPa·s) 250 - 800
Spindle Number3

Site of Manufacture (and Product Code)


Application Data

Michem® Coat 40Y can be applied at the corrugator and off-line using either a blade or a rod coater.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.