Michem® Coat 55

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


An oil and grease resistant coating which also imparts good water resistance. It is printable and gluable with water based and hot melt adhesives.


Fluorocarbon free, water and grease resistant coating

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishablesgrease & oil resistance

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceOff-white liquid
Percent Non-Volatile47.0 - 49.0
Brookfield Viscosity (cps, mPa·s) 200 - 650
Spindle Number3

Site of Manufacture (and Product Code)

CIN (MC55)

Application Data

Michem® Coat 55 is an excellent choice for application at the wet end of the corrugator or offline using a rod coater with minimum #2 rod. Do not dilute.


Handle in accordance with good industrial hygiene and safety practice.