Michem® Coat 95
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
A good multi-purpose coating that provides excellent water, oil and grease resistance. This product is heat sealable and cold set gluable as well.
Water and grease resistant, heat sealable coating
This product is used in many applications including the following:
|Food Service||grease & oil resistance, water resistance|
See more products recommended for Food Service.
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||46.0 - 48.0|
|Brookfield Viscosity (cps, mPa·s)||250 - 650|
Site of Manufacture (and Product Code)
Michem®Coat 95 is designed to be flexo or gravure applicable. For use as a heat seal coating on paper at a dry coating weight between 4 - 6gsm is recommended. Typical sealing conditions are 140-200C, 4 bar pressure, 1 sec dwell time. EZ Cup Viscosity = 20 - 40seconds, #3 Cup.
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.