Michem® Emulsion 1270

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


Provides slip and block resistance in a wide variety of coatings and formulas. It has very broad global food contact compliance, combined with a wide pH compatibility. It is a more cost effective solution than Michem® Emulsion 13025P.


Nonionic carnauba emulsion

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Functional Coatingsblock resistance, slip and lubricity

See more products recommended for Functional Coatings.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceTan, low viscosity liquid
Percent Non-Volatile24.5 - 25.5
Brookfield Viscosity (cps, mPa·s) 40 max
Spindle Number1

Site of Manufacture (and Product Code)

AUB (me1270.E)

Application Data

Michem® Emulsion 1270 should be added at a few percent solids (typically 2 to 4%) in your coating, with adequate mixing.


Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.