Michem® Emulsion 36840
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Improves water resistance, mar resistance and anti-block properties in paints and coatings.
Anionic paraffin/polyethylene wax emulsion
This product is used in many applications including the following:
|Building Paints||block resistance, open time, water resistance|
|Fruit & Vegetable Coatings||moisture control|
|Exterior Wood Protection||block resistance, water beading, water repellence|
See more products recommended for Building Paints.
See more products recommended for Fruit & Vegetable Coatings.
See more products recommended for Exterior Wood Protection.
These physical properties are typical but should not be considered specifications.
|Appearance||White, opaque liquid|
|Percent Non-Volatile||39.5 - 40.5|
|Brookfield Viscosity (cps, mPa·s)||<500|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.