Michem® Emulsion 42035A
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
This film former for fiberglass sizing formulations is used to reinforce polypropylene. It provides an excellent balance between mechanical properties and color and is suitable for sizings for chopped strands as well as for continuous fiber.
Cationic water based emulsion of polyolefin waxes.
This product is used in many applications including the following:
|Fiber Sizing||chopped strands|
See more products recommended for Fiber Sizing.
These physical properties are typical but should not be considered specifications.
|Appearance||Off-white to yellow liquid|
|Percent Non-Volatile||34.5 - 35.5|
|Brookfield Viscosity (cps, mPa·s)||<30|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Use personal protective equipment as required.