Michem® Emulsion 61335
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Provides excellent slip and mar resistance and anti-blocking properties for can and coil applications. It is also used as a release and slip aid in adhesives and paper coatings.
Anionic polyethylene emulsion
This product is used in many applications including the following:
|Can & Coil||block resistance, lubricity, mar resistance|
See more products recommended for Can & Coil.
These physical properties are typical but should not be considered specifications.
|Percent Non-Volatile||34.5 - 35.5|
|Brookfield Viscosity (cps, mPa·s)||<50|
Site of Manufacture (and Product Code)
Ensure adequate ventilation. Use personal protective equipment as required.