Michem® Flex P1853

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


Promotes excellent adhesion to extrusion coated resins for metal and paper substrates resulting in exceptionally high bond strength with good water resistance.


Water based primer for extrusion coated resins

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Extrusion Coating Primersadhesion for film, adhesion for metal and paper, peel strength, water resistance

See more products recommended for Extrusion Coating Primers.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite translucent liquid
Percent Non-Volatile28.0 - 30.0
Brookfield Viscosity (cps, mPa·s) <100
Spindle Number1

Site of Manufacture (and Product Code)

CIN (MFP1853)
AUB (MFP1853.E)
SNG (MFP1853.S)

Application Data

Michem® Flex P1853 may be applied via flexo, gravure or smooth roll coater. Dry thoroughly with hot, circulating air. May be used for in-line or off-line processes. Recommended application weight for film substrates is between 0.1 - 1.0 dry g/m2. EZ Cup Viscosity - #2 cup 19-21 sec.


Handle in accordance with good industrial hygiene and safety practice.