Michem® Flex R1924
Brand Family Overview
Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.See more Mold Release products.
Promotes print receptivity and adhesion of UV cured inks and coatings to flexible packaging substrates and labels.
Water-based print receptive primer
This product is used in many applications including the following:
|Functional Coatings||print receptivity, rub resistance, water resistance|
See more products recommended for Functional Coatings.
These physical properties are typical but should not be considered specifications.
|Appearance||Straw to pink colored translucent liquid|
|Percent Non-Volatile||42.0 - 45.0|
|Brookfield Viscosity (cps, mPa·s)||200 max|
Site of Manufacture (and Product Code)
Michem® Flex R1924 can be applied via gravure, flexo and other coating methods. A corona treatment of the surface is recommended before applying the coating. A coat weight of 0.5 gsm dry is recommended. The product needs to be dried using hot air. EZ Cup Viscosity - #2Cup, 25 - 27 seconds.
Handle in accordance with good industrial hygiene and safety practice.