Michem® In-Line Primer 030

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

Imparts a print-receptive surface to most substrates to improve the ink transfer and adhesion of HP Indigo Electroinks. It is used in the in-line priming unit available as options on both the WS6000 and WS6600 presses. The primer improves the surface of a wide range of paper substrates, both uncoated and clay-coated of various basis weights, as well as PSA label stocks with paper or polyolefin face-stocks, including textured papers and transparent labelstock. This product possesses good stability to light and is resistant to yellowing.

Description

Primer for Digital Printing

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
HP Indigo SolutionsApplicator - Indigo ILP station, OEM - Indigo 8000, OEM - Indigo ws6000, Substrate - paper

See more products recommended for HP Indigo Solutions.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceWhite, translucent liquid
Percent Non-Volatile27.5 - 29.0
Brookfield Viscosity (cps, mPa·s) <100
Spindle Number1
RPM60

Site of Manufacture (and Product Code)

CIN (ILP030)
AUB (ILP030.E)
SNG (ILP030.S)

Application Data

Michem® In-Line Primer 030 is designed specifically for use in the in-line priming unit of an HP Indigo WS6600 printing press. As such, when run as instructed by HP Indigo on paper substrates, the ILP unit will apply the correct amount of primer to achieve optimal ink adhesion and press performance. EZ Cup Viscosity - #3 Cup, 8 - 13 seconds. 09.09.16CAR: added information to the Application Data per JB. Do not dilute.

Storage

Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice.