Michem® Release Agent 9004

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.

Usage

A platen coating that acts as a metal sealer. It imparts a low COF to seal the surface of the platen, produces a cleaner surface, and reduces the frequency of cleanings. It also provides a smoother board surface over time, requiring less sanding.

Description

Proprietary release blend

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Belt & Platen Coatingsrelease
Laminated Strand Boardrelease
Oriented Strand Boardrelease
Medium Density Fiberboardrelease
Particle Boardrelease

See more products recommended for Belt & Platen Coatings.
See more products recommended for Laminated Strand Board.
See more products recommended for Oriented Strand Board.
See more products recommended for Medium Density Fiberboard.
See more products recommended for Particle Board.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceClear liquid
Percent Non-Volatile4.5 - 5.5

Site of Manufacture (and Product Code)

CIN (MRA9004)
SNG (MRA9004.S)

Application Data

Michem® Release Agent 9004 is spray, roll or wipe applied directly to the press platens prior to processing.

Storage

Ensure adequate ventilation. Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Use personal protective equipment as required.