Michem® Tite 242AF

Brand Family Overview

Mold Release is a solventborne polyethylene emulsion that eliminates the high stress between a mold and the molded part, typically used for ceramics. It allows for movement and shrinkage of the part during processing and subsequent temperature fluctuations. With Mold Release, the part releases clean.

See more Mold Release products.


A coating designed to provide a tenacious bond between corrugated and either Surlyn or polyethylene clear skin pack films, firmly trapping the product in between. It can only be glued with hot melt adhesives, except where the coating has been flexo applied and ommitted from areas to be glued.


Skin packaging primer

Performance Attributes

This product is used in many applications including the following:

ApplicationProperties Imparted
Perishablesskin packaging

See more products recommended for Perishables.
Physical Properties

These physical properties are typical but should not be considered specifications.

AppearanceTranslucent liquid
Percent Non-Volatile20.5 - 22.5
Brookfield Viscosity (cps, mPa·s) 300 max
Spindle Number2

Site of Manufacture (and Product Code)


Application Data

MT242AF is usually applied at the dry end of the corrugator. EZ Cup Viscosity = 15 - 30seconds, #3 Cup.


Handle in accordance with good industrial hygiene and safety practice.